Technical Documentation

ACIDO PROVERTICAL is a” thickener" .
It is used to thicken or modify the rheology of the Ideal Work Acid Stains to prevent them from dripping so that they can be effectively applied by paintbrush on vertical surfaces.

ACTIVE GEL contains ingredients and active acids to obtain micro-exposure on previously cured concrete surfaces.

Highly wear-resistant fillers that, when added to Ideal Sealer, give the surface high slip-resistance characteristics. Ideal for protecting floors and pool edges where such slip-resistance properties are required

Micro-emulsion water-salt repellent for concrete surfaces

Multifunction liquid admixtures for colour-conditioned concrete.

ARCHITOP CATALYST is a water based copolymer compound.
When ARCHITOP CATALYST is mixed with Ideal Work Colour Hardener it is possible to create highly resistant cement based coating with great aesthetic qualities. Thickness 2-4 mm

Slip-resistant fillers for water-based polyurethane resin IDEALPU

BARRIER-CEM is an epoxy-cement smooth finishing compound for thin coating, an ideal preparation for even humid surfaces prior to treating with other kinds of coatings. BARRIER-CEM is ideal to be applied on tiles and marble as a support for Ideal Work Microtopping

Pre-blended, fibre-reinforced concentrate admixture for overlay concrete flooring (2,5-6 cm)

CEMENT SCUD GEL is a formulation designed to protect concrete surfaces. When applied on concrete surfaces, CEMENT SCUD GEL forms a film that prevents splashes of cement and/or lime from attacking the existing surface.

COLO-RE’ is a solvent based system to renovate and colour old concrete surfaces. The product is specifically designed to be used over stamped concrete surfaces.

Colour hardener for stamped concrete floors.

Mixture of UV-stable pigments designed to colour Ideal Wall, Ideal Tix and Microtopping

Pre-blended, coloured, fibre-strengthened concentrate for aggregate concrete surfaces SASSOITALIA®

Two-components, solvent-free epoxy resin.

Finish Coat HP is a special formulation of IDEAL WORK MICROTOPPING Finish Coat. It is designed for high abrasion resistance and intense traffic areas. The innovative formulation offers the right balance between the resistance of BASE COAT and the aesthetic finish of FINISH COAT.

Closing joint filler in several sizes

HYDRO-DEFENSE is a solvent based hydrophobic protective layer / sealer. It is a perfect solution to increase the water repellency of Microtopping when it is applied in showers, sinks onto countertops and other surfaces.

Binding admixture for cement

IDEAL-BOND is a ready to use, cementitious bonding agent designed for use with cementitious topping like SASSOITALIA or TOP FLOOR on set concrete for indoor and outdoor use. It could be used also to bond new concrete (or other cementitious material) onto existing concrete. It is unaffected by possible subgrade moisture.

IDEAL CERA is made of metallic acrylic polymers that give the floor a significant aesthetic effect as well as increased protection, making it self-polishing without the need for polishing machines.

IDEAL COLOUR 21 is a solvent-free coloured epoxy enamel based on non- modified liquid epoxy resins catalysed with amide polymers. It is certified for occasional or continuous contact with foodstuffs.

IDEALCOLOUR 51 is a water based coloured coating, based on liquid epoxy
resins catalysed with amide polymers. IDEALCOLOUR 51 is a high-quality two component epoxy coating with good wear and chemical resistance. It is suitable for the coating of concrete plaster and tile walls and to cover industrial floors.

IDEAL CURING is ready-to-use, non-residual concrete curing agent that penetrates surfaces to cure the concrete from within. It is a solvent-based, clear, sprayable liquid that offers residual free performance

Polypropylene fibres

Colour hardener for decorative floors.

Water-based, self-cross-linking resin for concrete surfaces

Silicate densifier, hardener and sealer for concrete surfaces.

Silicate densifier, hardener and sealer for concrete surfaces with “Water Saver Technology”

Two-component epoxy system in cartridges for cracks repair

Epoxy mortar for repairs of concrete structures.

Two-component thixotropic epoxy mortar

IDEAL OPEN is a product composed of a strong acid buffered by surfactants and anti-foaming. It attacks surfaces with the strength of the acid and removes dirt and grease with the power of a detergent.

Dry shake for industrial floors

IDEAL PU 78 is a two-component, superior, chemically resistant, solvent based polyurethane floor coating system. IDEAL PU 78 is available in two different effects: glossy and matt.

IDEAL PU 78 SUPER MATT is a two-component, superior, chemically resistant, solvent based polyurethane floor coating system. New formulation: it does not require any dilution.

IDEAL PU WB is a two-component, superior, chemically resistant, water based polyurethane floor coating system. IDEAL PU WB creates a UV stable satin finish.

Water Based, two-component transparent polyurethane coating.

Adhesive solvent-free epoxy primer for wet surfaces

Clear acrylic solvent based sealer

Coloured acrylic, single-component, solventbased sealer

IDEAL STAINS are water and acid based solutions of metallic salts, formulated to “colour etch” new or existing concrete surfaces. These penetrating solutions react with the lime in the concrete and cement to form permanent, insoluble precipitants of varying colours.

IDEAL STRONG is obtained from pure raw materials. It is a strong alkaline degreasing agent suitable for all types of concrete, clinker, ceramic, tile, uncured terracotta, PVC and linoleum surfaces.

Thixotropic paste for concrete repairs

Pre-blended, fibre-reinforced concentrated admixture for vertical decoration and artificial rocks.

Pre-mixed cement mortar for vertical decorations.

IDEAL WATER is a two-component water-based pure epoxy resin and amide polymer. Diluted into water to different concentrations, it forms homogeneous mixtures than when impregnated improve the mechanical properties of concrete surfaces and other construction materials.

Three-components, coloured epoxy coating for decorative floors

Surface deactivator for the production of exposed aggregate concrete surfaces

IDEALCOLOUR 80 is a high-quality two-component polyurethane coating. It is based on polyester resins cured with aliphatic isocyanates to offer good chemical resistance and excellent mechanical wear resistance and a perfect stability of colours and gloss for exterior applications.

IDEALFLEX-PU is a single-component polyurethane sealant. Supplied in 600cc bags, it cures if exposed to air humidity. It turns into an adhesive elastic rubber with a low modulus of elasticity, providing very good resistance to weather and a good resistance to low inorganic chemicals.

Mixed with the Ideal IDEALPU-WB-EASY polyurethane resin, it reduces the reflection, giving the surface a completely matt effect. It has a strong attenuating effect on pastel colors.

Evaporation Control for Plastic Concrete

Concrete curing compound – Concentrate

Ph controller and neutralizer for reactive stains

Liquid release agent for Ideal Wall, Ideal Tix or stampable overlay

Cementitious topping with marble aggregates optimized for polishing

This product is classified as a low-foaming neutral concentrated cleaner with an
active rate of about 75%. Mangiapolvere reduces and almost completely eliminates the problem of dust generated by using powder release agent on stamped concrete.

Polymeric-cement coating system for creating seamless surfaces.

Vertical coating for fair-face concrete effect

MT-PRIMER is a two-component water-based pure epoxy primer and amide polymer. It forms homogeneous mixtures that improve the mechanical properties of cement surfaces like self-levelling compounds.

The premium natural stone silicone

Universal concentrate cleaner for quick cleaning of floors and hard surfaces. PERFETTO deeply cleans concrete floors, Microtopping surfaces and resin coatings without leaving streaks after drying. Does not foam and has a fresh pleasant deodorant effect.

PETROTEX-S is a solvent based Acryl-siloxane sealer, for protecting concrete from oil and water. PETROTEX-S is recommended for industrial or decorative floor applications where oil protection is required.

Polymeric Fiber for Structural use

Colour release agent for decorative concrete floors.

Water-based one-component acrylic primer for cementitious surfaces.

Multi-purpose, ready-to-use primer for internal and external walls.

Rainbow Colour Stains are designed to colour and antique Ideal Wall and Ideal TIX with realistic highlights and faux finishing. Rainbow Stains are penetrating water born acrylics. These specially formulated stains absorb into the surface
similar to Fresco stains and paints.

A new generation superplasticizer for concrete floors

New generation acrylic, solvent-based sealer

Cementitious floor topping and overlay

TYRE REMOVER is a detergent designed to remove the marks left by black vehicle tires. Its special formula helps remove dirt from the floor without ruining the surface layer of protective resin.

A new generation superplasticizer for concrete floors

Realizzazione di trattamento di acidificazione su preesistente pavimentazione in
calcestruzzo preventivamente trattata con corazzante Ideal floor di color Pewter.

Realizzazione di rasatura cementizia ad alta resistenza IDEALWORK ARCHITOP su sottofondi in calcestruzzo, ceramica, pietra naturale, in assenza di risalita di umidità.

Realizzazione di pavimentazione cementizia a basso spessore IDEAL WORK® BETONTOP® nuvolato.

Rivestimento continuo polimerico cementizio Ideal Work® Microtopping® di colore bianco o grigio

Realizzazione di pavimentazione in calcestruzzo STAMPATO IDEAL WORK®

Applicazione di intonaco stampato IDEAL WORK® IDEAL WALL ECO su murature e calcestruzzo grezzo.

Rivestimento cementizio decorativo tipo IDEAL WORK® STENCILTOP per il rinnovo di
pavimentazioni in cls usurate.