|
Ideal Hard
(Ideal systems/Flooring Chemicals)
|
|
...h densify the concrete substrate into a hardened, chemically-cured, homogeneous, concrete mass that resists abrasion, oil contamination and water. This chemical-ion exchange process begins immediately …
|
|
23 Oct, 2008 |
|
|
|
Ideal Tix products
(Ideal systems/Ideal Tix)
|
|
...ica aggregates, cements, fibres and co-polymer. Ideal TIX is a tixotropic material and has high impact and abrasion tolerances similar to concrete, it is suitable for interior or exterior application …
|
|
22 Oct, 2008 |
|
|
|
Reactive Stain products
(Ideal systems/Reactive Stain)
|
|
...RA is a high quality wax designed for use on concrete floors. The product is easily applied and offers good abrasion resistance. No need to buff as the material is self-finishing. Ideal Cera is packag …
|
|
22 Oct, 2008 |
|
|
|
Stamped Concrete-Colour references
(Ideal systems/Stamped Concrete)
|
|
... a surface application for freshly placed concrete. Ideal Work Colour Hardener increases surface impact and abrasion resistance. Ideal Work recommends that you should make a representative job site sa …
|
|
22 Oct, 2008 |
|
|
|
Stamped Concrete products
(Ideal systems/Stamped Concrete)
|
|
...ed to colour the surface of new concrete. When applied, a dense layer is formed, creating higher impact and abrasion resistance. Ideal Work Colour Hardener is available in 24 standard colours, custom …
|
|
22 Oct, 2008 |
|
|
|
Ideal Tix - Features and benefit
(Ideal systems/Ideal Tix)
|
|
...s a specially formulated tixotropic material with fibres and larger blended sands. The increased impact and abrasion resistance make Ideal TIX perfect for waterfalls and water features or themed work …
|
|
20 Oct, 2007 |
|
|
|
Micro-Top-Features and Benefits
(Ideal systems/Micro-Top)
|
|
...ment based coating designed to be used in multiple thin coat applications. Micro-top is highly resistant to abrasion and the adhesion properties allow Micro-top to be used on a wide variety of surface …
|
|
20 Oct, 2007 |
|
|
|
Stamped Concrete - Features and benefit
(Ideal systems/Stamped Concrete)
|
|
...ms of traditional paving, because stamped concrete is monolithic in structure and our products increase the abrasion resistance and seal the surface. Stamped concrete is timeless and will continue to …
|
|
11 Sep, 2007 |
|
|
|
SassoItalia
(Category List)
|
|
... la colorazione che preferisci e di raddoppiarne la normale resistenza alle abrasioni e all’usura, rispetto al normale calcestruzzo.
…
|
|
|
|
|
|
Ideal Wall
(Category List)
|
|
... la colorazione che preferisci e di raddoppiarne la normale resistenza alle abrasioni e all’usura, rispetto al normale calcestruzzo.
…
|
|
|
|
|
|
Ideal Tix
(Category List)
|
|
... la colorazione che preferisci e di raddoppiarne la normale resistenza alle abrasioni e all’usura, rispetto al normale calcestruzzo.
…
|
|
|
|
|
|
Frequently Asked Questions
(Category List)
|
|
...amping, Ideal Work does not only obtain the desired colour but gives also your floor a higher resistance to abrasion and wear than a traditional concrete.
Is it necessary …
|
|
|
|
|
|
Flooring Chemicals
(Category List)
|
|
...
Concrete floors should be protected from:
Dust
Abrasion due to high traffic
Oil and grease stains
Water, …
|
|
|
|
|
|
Ideal systems
(Section List)
|
|
...s also a protective concrete coating, protecting against freeze thaw and salt corrosion. Micro-top has high abrasion resistance, flexural and compressive
Micro-top …
|
|
|
|
|
|
|
Total 14 results found. Search for abrasion in IdealWork site with
|
