1. Section-Ideal Joint Classic (jpg) () : Ideal Joint system - Technical documentation
(File Repository)

2. Section-Ideal Joint Dual on concrete floor (jpg) () : Ideal Joint system - Technical documentation
(File Repository)

3. Section-Ideal Joint Performance (jpg) () : Ideal Joint system - Technical documentation
(File Repository)

4. Section-Ideal Joint Dual on tiles floor (jpg) () : Ideal Joint system - Technical documentation
(File Repository)

5. FAQs
(Contractors Area/contractors)

...12 cm in thickness, cuts (joints) must not be distanced more than 3 m from one another. Moreover, the sections obtained by means of joints must be as square as possible. Cuts can be masked ...

6. Ideal Work patent
(Ideal Systems/Constuction Joints)

... distribute load transfer evenly allowing horizontal, and lateral movement between each independent section of the slab-on-grade. How It Works.   IDEAL JOINT SYSTEM&re...

7. Problems connected to traditional joints
(Ideal Systems/Constuction Joints)

...for the steel mesh should be placed one third of the slab’s thickness starting from the upper section of the slab-on-grade (Figure 8b). ...

8. Sassoitalia - Features and benefits
(Ideal Systems/Sassoitalia®)

...with little extra cost. • Light, bright colours including white can be used. • Thin section application for areas with fine level tolerances. • Even and consisten...

9. Frequently asked question
(Category List)

...12 cm in thickness, cuts (joints) must not be distanced more than 3 m from one another. Moreover, the sections obtained by means of joints must be as square as possible. Cuts can be masked ...