Ideal Floor

Decorative floor colour hardener.

Ideal Floor is the ultimate dry shake for industrial and decorative floors that require additional abrasion resistance and impact protection. Formulated to be easily incorporated into the surface of freshly placed concrete, Ideal Floor hardener produces hard, durable, abrasion-resistant hardscapes and industrial or interior retail floors. Ideal Floor  is normally used to make Nuvolato and Reactive stain floors.

Ideal Floor TPI

Ideal Stain

Reactive  stains for concrete surfaces.

Ideal Stains are water and acid based solutions of metallic salts, formulated to “colour etch” new or existing concrete surfaces. These penetrating solutions react with the lime in the concrete and cement to form permanent, insoluble precipitants of varying colours. Ideal Stain creates uneven, variegated or translucent colour effects, much like the shadings found in natural stone, marble or slate. The distinctive obtained look is ideal for exteriors, interior floors, walls, and artificial rock and water features. Ideal Stains are available in 7 standard colours. 

Ideal Stain TPI

Neutralize

Ph controller

Neutralize is designed to balance the ph level of concrete and cement based coating after use of reactive stains.

Neutralize TPI

Ideal Hard

Concrete sealer, densifier, chemical hardener.

Ideal Hard is a proprietary, colourless chemical solution that increases the wear surface strength of concrete floors that are subjected to pedestrian and vehicle traffic. Ideal Hard deeply penetrates concrete surfaces to seal, harden, increase density and waterproof them. Ideal Hard floors last longer, cost less to maintain, are safe to use, and are guaranteed to resist dusting for years to come.

Ideal Hard TPI

Ideal Cera

Metallic wax.

Ideal Cera is a high quality metallic wax designed for use on concrete floors.
The product is easily applied and offers good abrasion resistance. No need to buff
as the material is self-finishing.

Ideal Cera TPI

Ideal Fibre

Polypropylene fibres.

By adding these polypropylene fibres to the concrete during the mixing process, shrinkage cracks that can occur during the first 24 hours are virtually eliminated.

 Ideal fibre TPI